Plastic spacers

Stable plastic spacer with stopper for horizontal reinforcement. One set consists of 10 rings (approx. diameters: 19, 22, 25, 28, 30, 33, 36, 39, 41, 44 cm) and covers a surface of ca. 0,84 m². (Ø 840 cm² per Ring)

Manufactured height 10 – 35 mm

Economical plastic spacer with hooks for wall and ceiling reinforcement. One set consists of 5 rings (diameters: 22, 27, 32, 37, 42 cm) and covers a surface of ca. 0,42 m². (Ø 840 cm² per Ring)

Manufactured height 10 – 60 mm

Large-surface supporting concrete spacer for ceiling reinforcement. One set consists of 6 rings (diameters: 18.5 - 21.5 - 24.5 - 27.5 30.5 - 33.5 cm) covers a surface of approx. 0.33 m² (Ø 550 cm² per ring).

Manufactured height 10 – 35 mm

Large-surface supporting spacer.

External size: 20 x 10 cm

Manufactured height 10 – 50 mm

Good stability due to offset support legs, very good concrete flow, coupling on end enables extension to any length.

Manufactured height 15 – 35 mm

Spacer strip with large side openings for good concrete flow. Type without side openings is also available.

Manufactured height 15 – 50 mm

360° supporting plastic spacer, for vertical round steel bar reinforcement. For steel diameter from 4 – 20 mm.

Manufactured height 15 – 75 mm

Plastic spacer for 360° support. Robust design with high clamping effect. The standard solution for vertical reinforcement.

Manufactured height 10 - 50 mm

Plastic spacer for 360° support for vertical reinforcement. Overlapping on the insertion slot prevents spacer slipping off steel. For steel diameters of 4 to 12 mm.

Manufactured height: 10 – 20 mm

Stable spacer with flexible clamping mechanism.

Manufactured height 10 – 50 mm

Stable plastic spacer with punctiform support surface. For clamping to mesh cross (steel Ø 6 / 8 mm).

Manufactured height: 10/15 and 20/25 mm

Semicircular spacer with minimal support surface. With rubberized fastener.

Manufactured height: 15 and 20 mm

Plastic spacing for three concrete covers. Simplifies warehousing.

Manufactured height: 10, 15 and 20 mm

Plastic spacer for use with insulation material. One spacer for two concrete covers. Diameter 48 mm.

Manufactured height: 10/15 and 20/25 mm

Plastic spacer for use with insulation material. Square base plate (35 x 35 mm). For steel diameter up to 8 mm.

Manufactured height: 25 and 35 mm