Miscellaneous Prefab and Construction Materials
HÜWA-Profi
 |
Cone for pipe brace RSR 22 - 26 mm. Incl. adhesive cover (using polystyrene adhesive). |
HÜWA Plastic Cone KK
 |
Cone for pipe brace RSR 22 - 26 mm. |
Seal Plug
 |
Plug made from elastic soft PVC for optimal sealing. |
Formwork Plug
 |
Plug to close openings in formwork. |
Cap
 |
To seal fiber concrete pipes and braces. |
Coupling
 |
To connect braces and fiber concrete pipes. |
HÜWA-Shim
 |
Mounting plate without slot, length of sides 70 x 70 mm. Manufactured height 2 – 20 mm |
HÜWA-Shim with slot
 |
Mounting plate with slot, length of sides 70 x 70 mm. Manufactured height 2 – 20 mm |
HÜWA Spacer Bracket
 |
Light plastic bracket for storing paving slabs. Allows for ventilation during storage and transport. |
HÜWA Stacking Bracket
 |
Sturdy plastic bracket for storing prefab components. Allows for ventilation and prevents spots during storage. |
HÜWA-Anchor Nails
 |
Anchor nails for installation of insulation panels. Manufactured length: 5 – 15 cm |
HÜWA Clamping Anchor i M
 |
For the bridge-free fastening of insulation boards to concrete construction components. Can be fastened to butt joints as well. The HÜWA clamping anchor is inserted into the insulation board on the inside of the formwork and then the reinforcement is prefabricated. |
Insulation Nail
 |
Insulation nail made from impact resistant plastic for hard insulation boards. Suitable for concrete, solid brick and gypsum. |
Insulation Dowel
 |
Insulation dowel with pin for substrates with low bearing capacity. Suitable for concrete, natural stone, solid brick and other materials with medium and high strengths. |
Corner Strip
 |
For breaking corners at different heights and of different designs. Made from impact resistant hard PVC or PE for and without nail flag for nail guns. Available with and without nail flag. |
HÜWA Universal Sleeve
 |
Pipe for cutouts such as with railing brackets, incl. 2 plastic caps. |
Formwork Stop
 |
To fix formwork panel in wall floor. Available with or without nail. |
Binding Wire
 |
Binding wire, soft annealed. Diameter 1,4 mm |
Eyelet Wire
 |
Eyelet wire with and without plastic sheathing. Made either from stainless steel, galvanized or annealed wire. Different dimensions available upon request. |
Twister
 |
Twister to close bags and connect reinforcing bars, mat reinforcement, and fences. |
Reinforcing Pliers
 |
To twist and cut binding wire. High cutting force with little effort due to optimal transmission. Length 280 or 300 mm. Ideal for medium-hard wire. |
Bolt and Mat Cutter
 |
Construction steel cutter in different lengths and designs. |
Ribbed Expanded Metal Sheet Type I
 |
Used as plaster base, plaster reinforcement and shaft casing. Rib height is approx. 10 mm and dimensions are 2.5 x 0.6 m. |
Ribbed Expanded Metal Sheet Type II
 |
Used as permanent formwork in area of construction joints as well as laminar, level or formed components. Very robust design and thus especially economic to use with large span widths. Perfect bond between the concrete sections without additional work on construction joints required. With an approx. rib height of 21 mm. |
Pillar Formwork
 |
Pillar formwork for round, rectangular, 6-corner, 8-corner pillars and special solutions. Easy and quick formwork removal with rip cord or knife. Formwork or inner liners can be used as protection during the remainder of the construction time and remain on the concrete pillar. The casing pipes are waterproof, which means they can be stored and installed outdoors regardless of the weather. Lashing strap system: Easy and exact positioning, suitable for all casing pipe diameters. Many different dimensions and lengths are available upon request. |
Reinforcement Connection - two rows
 |
With two rows, length 125 cm, Wire diameter 8, 10 and 12 mm, wire distance 10, 15, 20 and 25 cm. Available types: |
Reinforcement Connection - single row
|
With single row, length 125 cm, Wire diameter 8, 10 and 12 mm, wire distance 10, 15, 20 and 25 cm. Available types: |